Usable Materials Plastic, resin, wood and non-ferrous metals XYZ-Axis Travel 19.6(X) x 15.7(Y) x 6.1"(Z)[500 (X) x 400 (Y) x 155 mm (Z)] Loadable workpiece size with optional rotary axis (ZCL-540) * 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length] Actual milling area is smaller Distance From Spindle Nose to Table Maximum 10" (254mm) Table Size 21.7(W) x 16.5"(D) [550(W) x 420mm (D)] Loadable workpiece weight At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg) XYZ-axis drive system AC servo motor, 60W   Operating speed Maximum 295ipm (7.5m/min) Acceleration 0.2G, 0.1G, 0.05G Software resolution RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.00004" (0.001mm) Mechanical resolution 0.00004” (0.001mm) Positioning accuracy +/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions Repeat accuracy +/-0.0019"(+/-0.05mm), under no-load conditions   Origin reproducibility (when the power is switched on/off) +/-0.0019" (+/-0.05mm)   Spindle motor DC brushless motor, maximum 400W Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering Tool chuck Collet method, maximum tool diameter: 0.4" (10mm) Control command sets RML-1 and NC codes Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) Power supply Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz Required power capacity: 7A (100 to 120V)/4A (220 to 240V) Power consumption Approx. 700W Acoustic noise level During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) Dimensions Width x depth x height: 29.3 x 37.6 x 33.8Z" (745 x 955 x 858mm)   Weight 225lb (102kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (no condensation) Included items Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, and NC Code Reference Manual